How to adjust the length and tightness of the sealing tape by the automatic sealing machine
- Time of issue:2022-04-07
- Views:0
How to adjust the length and tightness of the sealing tape by the automatic sealing machine
Tape sealing machines are used more and more now. Tape is the main consumable of the sealing machine. The sealing mainly relies on the tape to stick and stick. The tightness of the tape directly affects the sealing effect. Therefore, the installation and In terms of adjustment, it is very important. Xiaohui Packaging Xiaobian will briefly introduce how the automatic carton sealing machine adjusts the length and elasticity of the sealing tape.

First, first, put the new OPP tape roll on the mandrel,
Second, pull out the tape, go around roller C and then around roller B along the line,
Third, bypass the roller D, and finally pass the tape through the tape seat E and out of the roller F. During the whole process, we must pay attention that the adhesive side of the tape must face outwards.
2. Adjust the position of the tape. If the tape is not on the centerline of the case, make an adjustment: Loosen nut B, then use a screwdriver to adjust the spindle so that the tape position can be adjusted.
3. Adjustment of tape tension. Rotating the knob can make the tape roll rotate at a moderate speed, loosen the nut M8, adjust the front and rear positions of the screw M8×50, and change the elastic force of the long tension spring of the pendulum rod, thereby controlling the magnitude of the tape tension. Rotate the knob clockwise, the tension of the tape will become larger, and vice versa; if the screw M8×50 is adjusted forward, the tension of the tape will become larger, and vice versa.
The above are the precautions for the adjustment and installation of the sealing machine tape introduced by Xiaohui Packaging. I hope that through the introduction of Xiaohui Packaging, everyone can operate the tape sealing machine normally.
Related News
-
The operation steps of Xiaohui packaging vertical unpacking machine are simple and easy to understand
The automatic vertical unpacking machine needs to be debugged before use, so which places need to be debugged? Just try it out according to the following operation steps. Before leaving the factory, the vertical unpacking machine packaged by Xiaohui will be marked with the operation steps on the machine, which is convenient for operation. - The difference between Xiaohui packaging vertical unpacking machine and horizontal unpacking machine 2022-05-11
- Share basic problems and maintenance knowledge of tape sealing machine 2022-05-07
- What is the movement of the sealing machine? 2022-05-07
- How to maintain the tape sealing machine 2022-05-03
- Which tape sealing machine manufacturer is good? Xiaohui Packaging 2022-05-03
- How to choose a carton sealing machine? Xiaohui Packaging teaches you 2022-04-27
- The advantages of e-commerce unpacking machine and sealing machine 2022-04-27

WeChat

Electronic album
TEL:+86-755-82590101
FAX:+86-755-81493232
E-MAIL:sdwpack@sdwpack.com
Shenzhen Headquarters:No. 64, Chuangye 2nd Road, Second Industrial Zone, Jiangbian Community, Songgang Street, Baoan District, Shenzhen
East China Branch:No. 301, Baoqun Road, Yaozhuang Town, Jiashan County, Jiaxing City, Zhejiang Province
This website supports IPV4 IPV6 two-way access
© 2022 Shenzhen SDWPackaging Technology Co., Ltd. All rights reserved. 粤ICP备13020602号 Powered by www.300.cn SEO