How to maintain the tape sealing machine
- Time of issue:2022-05-03
- Views:251
How to maintain the tape sealing machine
The tape sealing machineis a common automatic sealing and packaging equipment on the market. Like other equipment, after a period of use, it needs to be well maintained and maintained. Only in this way can the normal operation of the equipment ensure the normal operation of the equipment. At the same time, it can also prolong its service life.
When using the tape sealing machine, there are often some faults and small faults. For some people who don't understand, they think this is a big problem. In fact, it will be very simple as long as it is well maintained. Therefore, it is natural to master the method of this matter. Generally speaking, the tape sealing machine must be operated in strict accordance with the instruction manual, and it is also very important to ensure that the inside and outside of the instrument are dry and hygienic before and after each use. In addition, it is also necessary to check whether the base of the unit is fully padded and whether the anchor bolts are tightened.
Of course, all parts of the equipment are fully checked to see if the parts are complete. It is also necessary to look at the tightness of each bolt and nut, the installation quality of each fastener and positioning pin, and the installation quality of intake and exhaust pipes and valves. If there is a problem, it must not be used forcibly. In addition, the staff also need to pay attention to clean the centrifugal chamber with neutral detergent and dry it with a soft cloth in time after the tape sealer is used. Attention should be paid here. It is not allowed to scrub the rotor with non-neutral Chemically corroded inner cavity. There are still many things to do when the tape sealer is maintained.
In addition, you also need to know that if the tape sealing machine is not used for a long time, it should be cleaned. The purpose is to avoid the cleaning agent and water being sprayed in the centrifugal chamber, or to prevent the motor from rusting and reducing its performance. Use life, open the door to dry. In addition, the equipment should be lubricated in daily life, because the lubrication of the linear module slide table will directly affect its life, so failure to lubricate on schedule will increase the operating friction of the core components and shorten the product life, and the air is non-conductive. Dust, non-corrosive or insulating gas. When maintaining the tape sealing machine, the staff also need to know that there are no other strong vibration sources nearby, and that the site has ventilation and drainage devices. Only in this way can the life of the whole machine be improved.
Xiaohui packaging manufacturers suggest that you must also check whether the foundation is firm, whether the surface is flat, and whether the foundation is higher than the ground before operating the tape sealer.
Related News
-
The operation steps of Xiaohui packaging vertical unpacking machine are simple and easy to understand
The automatic vertical unpacking machine needs to be debugged before use, so which places need to be debugged? Just try it out according to the following operation steps. Before leaving the factory, the vertical unpacking machine packaged by Xiaohui will be marked with the operation steps on the machine, which is convenient for operation. - The difference between Xiaohui packaging vertical unpacking machine and horizontal unpacking machine 2022-05-11
- Share basic problems and maintenance knowledge of tape sealing machine 2022-05-07
- What is the movement of the sealing machine? 2022-05-07
- How to maintain the tape sealing machine 2022-05-03
- Which tape sealing machine manufacturer is good? Xiaohui Packaging 2022-05-03
- How to choose a carton sealing machine? Xiaohui Packaging teaches you 2022-04-27
- The advantages of e-commerce unpacking machine and sealing machine 2022-04-27


© 2022 Shenzhen SDWPackaging Technology Co., Ltd. All rights reserved. 粤ICP备13020602号 Powered by www.300.cn SEO